Panasonic KX-NS300 Pc Programming Manual page 421

Name
VM DTMF Status Specifies the DTMF status signal the
Signal—FWD to PBX sends to the VPS when the call
Extension has been forwarded to another
Ringback Tone extension and the PBX is calling the
destination extension.
VM DTMF Specifies the DTMF command the
Command— PBX sends to the VPS when a call is
Recording forwarded, intercepted, or transferred
Message to the VPS, so that the caller can
leave a message in a certain mailbox.
VM DTMF Specifies the DTMF command the
Command— PBX sends to the VPS when an
Listening extension user answers a message
Message waiting notification from the VPS, so
that the extension user can retrieve a
new message in a certain mailbox
without having to dial the mailbox
number manually.
VM DTMF Specifies the DTMF command the
Command— PBX sends to the VPS to switch from
Switching to AA VM Service Mode to AA Service
Mode.
VM DTMF Specifies the DTMF command the
Command— PBX sends to the VPS to switch from
Switching to VM AA Service Mode to VM Service
Mode.
Timing—DTMF Specifies the length of DTMF signals
Length for VM the PBX sends to the VPS.
Timing—Inter- Specifies the length of pause time
digit Time between DTMF signals the PBX
sends to the VPS.
Timing—Waiting Specifies the length of time that the
Time before PBX waits before sending the Follow
Sending Follow on ID to the VPS after the VPS has
on ID answered a call.
Timing—Waiting Specifies the length of time that the
Time before PBX waits before sending the DTMF
Sending VM status signal to the VPS after the VPS
DTMF Status has finished dialling.
Signal
Others—Call Enables the queuing of calls when all
Waiting on VM extension ports of the VM (DTMF)
Group group are busy. (Call Waiting tone is
not sent to any VM port.)
11.12.1 PBX Configuration—[3-12-1] Group—VM(DTMF) Group—System Settings
Description Value Range
Max. 4 digits
(consisting of 0–9, *,
#, and P [pause])
Max. 16 digits
(consisting of 0–9, *,
#, H [mailbox number],
and P [pause])
Max. 16 digits
(consisting of 0–9, *,
#, H [mailbox number],
and P [pause])
Max. 16 digits
(consisting of 0–9, *,
#, H [mailbox number],
and P [pause])
Max. 16 digits
(consisting of 0–9, *,
#, H [mailbox number],
and P [pause])
80 ms, 160 ms
80 ms, 160 ms
0.5 s, 1.0 s, 1.5 s, 2.0
s
0.5 s, 1.0 s, 1.5 s, 2.0
s
Disable, Enable
PC Programming Manual
Links
Feature Manual
References
2.20.1 Message
Waiting
Feature Manual
References
2.2.2.4 Queuing
Feature
421