Panasonic KX-NS300 Pc Programming Manual page 222

9.11.1 PBX Configuration—[1-1] Configuration—Slot—Shelf Property—V-IPGW—GK Settings
Name
T310 Specifies the maximum time that the PBX waits for a continuance
message after receiving the Incoming Call Proceeding message.
T313 Specifies the maximum time that the PBX waits for a reply after
sending the Connect message.
T316 Specifies the maximum time that the PBX waits for a reply after
sending the Restart message.
T318 Specifies the maximum time that the PBX waits for a reply after
sending the Resume message.
T319 Specifies the maximum time that the PBX waits for a reply after
sending the Suspend message.
T322 Specifies the maximum time that the PBX waits for a reply after
sending the Status enquiry message.
T3D3 Specifies the length of time after which the PBX tries to establish
L2 in "Permanent" mode.
T3D9 Specifies the length of time after which the PBX tries to disconnect
L2 in "Call by Call" mode.
9.11.1 PBX Configuration—[1-1] Configuration—Slot—Shelf
Property—V-IPGW—GK Settings
Gatekeeper registration information can be programmed.
Name
Destination
Number
Device Name
9.11.2 PBX Configuration—[1-1] Configuration—Slot—Shelf
Property—V-IPGW—Hunt Pattern
The related settings of hunt patterns can be programmed. The hunt pattern determines how to route
incoming calls through virtual IP trunks to the PBX.
A maximum of 32 hunt patterns can be programmed.
Hunt Pattern 1–16
Name
Leading
Number
222 PC Programming Manual
Description
Description
Specifies a telephone number to register
with a gatekeeper.
Specifies the name of the device for
programming reference.
Description
Specifies the leading digits of
dialled numbers by which to
determine the call distribution
port group to direct incoming
calls.
Max. 30 digits (consisting of
0–9)
Max. 20 characters
Value Range
Max. 30 digits
(consisting of 0–9)
Value Range
0–3000 × 100 ms
0–600 × 100 ms
0–3000 × 100 ms
0–600 × 100 ms
0–600 × 100 ms
0–600 × 100 ms
0–3000 × 100 ms
0–3000 × 100 ms
Value Range
Links
Links
Links