Panasonic KX-NS300 Pc Programming Manual page 441

Name
FWD
Destination for
Call from
Extension
FWD No
Answer Time
Keep ring after
FWD NA to CO
Remote FWD
COS
12.1.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—
Extension Settings—CLIP Generate
CLIP Generate allows the CLIP numbers for a set of locations in series to be programmed together. Pre-
assigned CLIP numbers for those locations will be overwritten.
If a number generated here is longer than 16 digits, the additional digits will be discarded.
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings
Description
Indicates the forwarding
destination of incoming
intercom calls (reference
only).
Specifies the length of time
that an incoming call rings
at the extension before the
call is forwarded.
Specifies whether an
extension continues to ring
after forwarding an
incoming call to an outside
destination via FWD N/A or
FWD Busy N/A.
Specifies the COS that
allows the FWD setting on
the extension to be
changed from another
extension. This COS must
then be set for the
extensions that will
remotely change the FWD
setting.
Value Range
Max. 32 digits PC Programming Manual
(consisting of 0–9,
References
*, #, [ ] [Secret],
12.1.2 PBX Configuration—
and P [Pause])
[4-1-2] Extension—Wired
Extension—FWD/DND
Feature Manual References
2.3.2 Call Forwarding (FWD)
0–120 s PC Programming Manual
References
12.1.2 PBX Configuration—
[4-1-2] Extension—Wired
Extension—FWD/DND
Feature Manual References
2.3.2 Call Forwarding (FWD)
Disable, Enable PC Programming Manual
References
12.1.2 PBX Configuration—
[4-1-2] Extension—Wired
Extension—FWD/DND
Feature Manual References
2.3.2 Call Forwarding (FWD)
Feature Manual References
Disable, 1–64
2.3.2 Call Forwarding (FWD)
Links
PC Programming Manual 441