Panasonic KX-NS300 Pc Programming Manual page 267

Name
Reverse Selects the type of trunk call for
Detection which the reverse signal from the
telephone company is detected.
Caller ID Enables the PBX to detect a Caller
Detection ID signal from the analogue trunk.
Pause Time Specifies the length of a pause.
Flash Time Specifies the length of a flash signal.
Disconnect Specifies the length of time after a
Time trunk is disconnected, during which
the PBX cannot seize the line.
9.24 PBX Configuration—[1-1] Configuration—Slot—Port Property - LCO Port
Description Value Range
Disable: For no Feature Manual
trunk call
References
Outgoing: For
2.5.4.5 Reverse Circuit
outgoing trunk
calls only
Both Call: For
both outgoing and
incoming trunk
calls
Disable, Enable PC Programming
Manual References
9.23 PBX Configuration—
[1-1] Configuration—Slot—
Card Property - LCO type
Feature Manual
References
2.19.1 Caller ID
1.5 s, 2.5 s, 3.5 s, Feature Manual
4.5 s
References
2.5.4.7 Pause Insertion
2.5.4.8 Host PBX Access
Code (Access Code to the
Telephone Company from
a Host PBX)
2.5.4.9 Special Carrier
Access Code
None, 16 × n Feature Manual
(n=1–255) ms
References
2.11.7 External Feature
Access (EFA)
0.5 s, 1.5 s, 2.0 s, Feature Manual
4.0 s, 12.0 s
References
2.11.6 Flash/Recall/
Terminate
Links
PC Programming Manual 267