Panasonic KX-NS300 Pc Programming Manual page 522

16.5 PBX Configuration—[8-5] ARS—Carrier
16.5 PBX Configuration—[8-5] ARS—Carrier
Carrier
It is possible to specify how user-dialled numbers are modified for connecting to the appropriate carrier. A
maximum of 48 different carriers can be programmed to be used with the ARS feature.
Name
Carrier Name Specifies the carrier name.
Removed Specifies the number of leading digits to
Number of remove from the user-dialled number.
Digits
Modify Specifies the commands to modify the
Command user-dialled number to access the
carrier. For details of each command,
see the Feature Manual.
CLIP Table Sets the CLIP numbers established for
No. each extension (wired/wireless) of a
carrier. The CLIP IDs for each CLIP
number are set in 12.1.7 PBX
Configuration—[4-1-7] Extension—
Wired Extension—CLIP ID Table and
12.2.5 PBX Configuration—[4-2-5]
Extension—Portable Station—CLIP
ID Table.
Carrier Specifies the carrier access code. The
Access Code carrier access code can be added to the
user-dialled number by specifying "C" in
Modify Command on this screen.
TRG Priority
Selects the order in which trunk groups are seized when making calls via each carrier.
Name
Trunk Group—
Priority 1–Priority 4
TRG 01–TRG 64
Selects the trunk groups that connect to the carrier.
522 PC Programming Manual
Description
Description
Specifies which trunk group is
seized in the order of priority 1 to
priority 4.
Value Range
Max. 20 Feature Manual
characters
References
2.8.1 Automatic Route
Selection (ARS)
0–15 Feature Manual
References
2.8.1 Automatic Route
Selection (ARS)
Max. 16 Feature Manual
characters
References
(consisting of 0–9,
2.8.1 Automatic Route
*, #, C, P, A, G, I
Selection (ARS)
and H)
1–8 Feature Manual
References
2.8.1 Automatic Route
Selection (ARS)
Max. 32 digits Feature Manual
(consisting of 0–9,
References
*, #, and P
2.8.1 Automatic Route
[Pause])
Selection (ARS)
Value Range
None, 1–64 Feature Manual
References
2.8.1 Automatic Route
Selection (ARS)
Links
Links