Panasonic KX-NS300 Pc Programming Manual page 628

23.3.5 UM Configuration—[4-3] Service Settings—Custom Service—Password
Name
Menu Repeat Specifies the number of times
Cycle (1-3) the Custom Service menu
message will be repeated to
the caller.
Wait for First Specifies the length of time
Digit (0-10 s) that the system waits for the
caller to dial the first digit after
a Custom Service menu is
played for the caller. If this
time expires, the No DTMF
Operation setting determines
how the call is then handled.
Maximum Specifies the number of times
Number of an invalid password is entered
Invalid Entry before the operation assigned
(1-10) for Entry Failure is executed.
No DTMF Determines how calls are
Input handled when callers do not
Operation dial any numbers in response
to system guidance (often
because they are rotary
telephone users). The default
setting is "Operator", which
allows the caller to be
automatically connected to an
operator after the message is
played.
Entry Failure Determines what operation is
activated when a caller enters
an invalid password X times.
(X= the value set for
Maximum Number of Invalid
Entry (1-10))
628 PC Programming Manual
Description Value Range
1–3 times
1–10 s
1–10 times
Trf to Mbx, Trf to Ext, Operator, Trf
to Out, Exit, Prev Menu, CS (see
23.3.1 UM Configuration—[4-3]
Service Settings—Custom
Service—Menu & Transfer—No
DTMF Input Operation)
Trf to Mbx, Trf to Ext, Operator, Trf
to Out, Exit, Prev Menu, CS, VM
Serv, Call Trf Serv, Subscriber
Serv, Dial by Name, Repeat
Menu, Main Menu, Trf to Fax Extn,
List All Names (see 23.3.1 UM
Configuration—[4-3] Service
Settings—Custom Service—
Menu & Transfer—Key –
Assigned Operation: 0–9, *, #)
Links
Feature Manual
References
3.2.1.15 Custom
Service
Feature Manual
References
3.2.1.15 Custom
Service
Feature Manual
References
3.2.1.15 Custom
Service
Feature Manual
References
3.2.1.15 Custom
Service
Feature Manual
References
3.2.1.15 Custom
Service