Panasonic KX-NS300 Pc Programming Manual page 272

9.26 PBX Configuration—[1-1] Configuration—Slot—Port Property - BRI Port
ISDN CO
Parameters for ISDN CO are not applicable for the BRI extension port.
The Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
Name
Port Type Selects the port type.
Each ISDN connection in a
QSIG network must have a
master port on one PBX and a
slave port on another PBX.
ISDN extensions can belong to
an incoming call distribution
group or idle extension hunting
group. In this case, an MSN
can be assigned.
Connection Indicates the port status. To
change the status of the port,
click the desired cell in the
column, and then select INS or
OUS for the port.
This option is only available in
On-line mode.
Subscriber Specifies the number used as
Number the CLIP number.
Ringback Enables the PBX to send a
Tone to ringback tone to an outside
Outside caller when the network cannot
Caller send the tone.
272 PC Programming Manual
Description Value Range
CO: For connecting to
public network
Extension: For connecting
to extension
QSIG-Slave: For
connecting to private
network (slave port)
QSIG-Master: For
connecting to private
network (master port)
INS: The port is in service.
OUS: The port is out of
service.
Fault: The port is not
communicating with the
network.
Max. 16 digits (consisting
of 0–9, *, and #)
Disable, Enable
Links
Feature Manual
References
4.1.2.2 Calling/
Connected Line
Identification
Presentation (CLIP/
COLP)