Panasonic KX-NS300 Pc Programming Manual page 37

Level
Installer
Administrator
User
For more information about creating and managing end user accounts, see 8 Users.
CAUTION
To the Administrator or Installer regarding account passwords
1.
Please provide all system passwords to the customer.
2.
To avoid unauthorised access and possible abuse of the PBX, keep the passwords secret, and
inform the customer of the importance of the passwords, and the possible dangers if they become
known to others.
3.
The PBX has no passwords set initially. For security, select an installer password as soon as the
PBX system is installed at the site.
4.
Change the passwords periodically.
5.
It is strongly recommended that passwords of 10 numbers or characters be used for maximum
protection against unauthorised access.
2.1.2 Access Levels
Access to menu options within Web Maintenance Console is restricted depending on the level of the
account and the current programming mode (see Programming Modes in 1.1.2 Introduction). When a
menu option is limited to certain access levels, this is noted in this manual in the initial description of that
menu option, for example:
"This option is only available at Installer level."
The options available for each programming mode and access level are shown below.
The access levels are abbreviated as follows:
U: User (User); A: User (Administrator); I: Installer
Note
User (User) accounts cannot be used when programming in Off-line mode.
A check mark indicates that the menu option is available for that access level.
Home Screen
System Information
Login Name
INSTALLER
1-16 character login name, using a-z,
A-Z, and 0-9 (case sensitive). Set
during account creation.
(see 8.2.1 Users—Add User—
Single User)
Menu Option
Password
4-16 character password, using a-z, A-Z,
and 0-9 (case sensitive).
For an initialised PBX that has not yet been
set up, the default Installer level password is
"1234". You will be prompted to choose a
new password for the Installer level account
when the Easy Setup Wizard is run (see
2.1.4 Easy Setup Wizard).
4-16 character password, using a-z, A-Z,
and 0-9 (case sensitive). Set during account
creation.
(see 8.2.1 Users—Add User—Single
User)
Off-line
A I
ü ü
PC Programming Manual
2.1.2 Access Levels
On-line
U A I
ü ü ü
37