Panasonic KX-NS300 Pc Programming Manual page 647

Name
Fax
Notification
Mode
Disconnect Parameters
Name
Maximum Silence
Time (0-60 s)
Maximum
Continuous Tone
Time (0-60 s)
Maximum Cyclic
Tone Time (0-60 s)
Maximum Call
Duration (0-60 min)
Transfer to Outside
These parameters determine how the system will transfer calls to a trunk via the following features: Call
Transfer Service, Custom Service, Personal Custom Service, Caller ID Callback, Call-through Service.
Name
Outside Transfer
Sequence—Call
Transfer to
Outside Sequence
(Up to 16 digits /
[0-9 * # D F R T , ;
N])
Description
Determines what action the system takes
when an incoming fax call is successfully
received by the main or alternate fax
extension. The system can announce to the
Fax Manager the number of received fax calls.
The number announced is the number of
received fax calls since the last time the
system notified the Fax Manager.
Specifies the length of silence detected by the system
before the system disconnects the call.
Specifies the length of time the system waits when a
continuous tone is detected before it disconnects the
call.
Specifies the length of time the system waits when a
cyclic tone is detected before it disconnects the call.
Specifies the maximum duration of calls. If the system
detects no DTMF signals for the specified amount of
time, it terminates the call. Calls will not be terminated
while playing or recording messages. If this setting is set
to "0", calls will not be terminated.
Description
Specifies the sequence the
system uses to transfer calls
to trunks.
24.4 UM Configuration—[5-4] System Parameters—Parameters
No: The system will not
notify the Fax Manager when
fax calls are answered.
Mbx: The system will
announce the number of
successfully received fax
calls to the Fax Manager
when the Fax Manager logs
in to his or her mailbox.
Ext: The system will
announce the number of
successfully received fax
calls to the Fax Manager by
calling the Fax Manager's
extension.
Description
Value Range
Max. 16 digits consisting of 0–9,
, # and special codes
D: Disconnecting
F: Flash (Recall)
R: Ringback Tone Detection
T: Dial Tone Detection
, : Dial Pause for 1 s (default)
; : Dial Pause for 3 s (default)
N: Telephone Number Dialling
0–9, , #: Dial Code
Value Range
Value
Range
0–60 s
0–60 s
0–60 s
0–60 min
Links
Feature
Manual
References
3.2.1.7 Call
Transfer to
Outside
PC Programming Manual
Links
Links
647