Panasonic KX-NS300 Pc Programming Manual page 621

Name
Call Specifies the type of dialling that
Transfer the system accepts during the
Anytime Custom Service in addition to the
single-digit Custom Service
options. This setting allows
callers to dial numbers to connect
themselves to an extension or
mailbox or enter a PIN.
Note
If you only need to allow
callers to dial single-digit
Custom Service option
numbers, set this parameter
to "No". When set to a value
other than "No", the system
always waits for the amount
determined by the Wait for
Second Digit (1-5 s) setting
before handling the call. This
will cause a delay between
the time the caller dials a
single-digit Custom Service
option number and when the
call is actually handled.
Wait for Specifies the length of time that
First Digit the system waits for the caller to
(0-10 s) dial the first digit after a Custom
Service menu is played for the
caller. If this time expires, the No
DTMF Operation settings
determines how the call is then
handled. If this parameter is set
to "0", No DTMF Input Operation
handles the call immediately after
the menu is played for the caller.
23.3.1 UM Configuration—[4-3] Service Settings—Custom Service—Menu & Transfer
Description Value Range
Extn: enables callers to be
transferred directly to their
intended party by dialling the
extension number.
Mbx: enables callers to leave
messages in a mailbox by
entering the mailbox number.
PIN: enables callers to be
transferred directly to the
specified party according to the
setting for PIN Call Routing
Service by dialling a PIN.
No: disables extension transfer
and mailbox transfer; only 1-
digit entries will function
(following the Custom Service
menu)
0–10 s
Links
Feature Manual
References
3.2.1.15 Custom
Service
Feature Manual
References
3.2.1.15 Custom
Service
PC Programming Manual 621