Panasonic KX-NS300 Pc Programming Manual page 422

11.12.2 PBX Configuration—[3-12-2] Group—VM(DTMF) Group—Group Settings
Name
Others—FWD to
the VPS
Sequence
Others—Intercept
Routing to the
VPS Sequence
Others—Mailbox
for Extension
Others—Message
Waiting Lamp
Control
11.12.2 PBX Configuration—[3-12-2] Group—VM(DTMF) Group—
Group Settings
A VM (DTMF) group has a floating extension number, and can be assigned as the destination for redirected
calls and incoming calls. To assign members to the group, click Member List. To view a list of all
programmed extension numbers and types, click Extension List View.
422 PC Programming Manual
Description
Specifies which DTMF commands the
VPS receives from the PBX when a
call is forwarded to the VPS, so that
the VPS can answer the call either
with a mailbox or in the AA service
mode. It is also possible to send no
DTMF signal to the VPS.
Specifies which DTMF commands the
VPS receives from the PBX when a
call is intercepted to the VPS, so that
the VPS can answer the call either
with a mailbox or in the AA service
mode. It is also possible to send no
DTMF signal to the VPS.
Specifies whether the mailboxes use
the same numbers as the extensions
and incoming call distribution groups,
or use different numbers as
programmed for each extension or
incoming call distribution group.
Specifies whether the PBX or VPS
cancels the Message Waiting feature
(e.g., turning off the MESSAGE
button light) when an extension user
answers the message waiting
notification from the VPS.
Value Range
None, Answer by
Mailbox, AA
None, Answer by
Mailbox, AA
Extension Number,
Programmed Mailbox
Number
By PBX, BY VM
Links
PC
Programming
Manual
References
11.5.1 PBX
Configuration—
[3-5-1] Group—
Incoming Call
Distribution Group
—Group Settings
12.1.1 PBX
Configuration—
[4-1-1] Extension
—Wired
Extension—
Extension
Settings
12.2.1 PBX
Configuration—
[4-2-1] Extension
—Portable Station
—Extension
Settings