Panasonic KX-NS300 Pc Programming Manual page 506

14.6 PBX Configuration—[6-6] Feature—Tenant
14.6 PBX Configuration—[6-6] Feature—Tenant
A maximum of 8 tenants can share the PBX. Each tenant is composed of specified extension user groups.
The PBX offers each tenant its own Time Table and system resources.
To assign extensions as operators easily, click Extension No. Setting (see 2.1.6 Extension Number
Setting).
Name
Music On Specifies the audio
Hold source to be used for
Music on Hold.
Operator Specifies the extension
(Extension number or the floating
Number) extension number of an
incoming call
distribution group to be
designated as the
tenant operator. When
this parameter is left
unspecified, the PBX
operator serves as the
tenant operator.
ARS Mode Specifies the ARS
mode used when
making a trunk call.
506 PC Programming Manual
Description
Same as System Setting,
BGM1, BGM2, BGM3, BGM4,
BGM5, BGM6, BGM7, BGM8,
Tone
Max. 5 digits (consisting of 0–
9)
Off: ARS is disabled.
On for Local Access
Operation: ARS operates
when an extension user
makes a call using any Idle
Line Access method.
On for Any CO Access
Operation: ARS operates
when an extension user
makes a call using any Trunk
Access method.
Same as System Setting: The
setting specified in ARS
Mode in 16.1 PBX
Configuration—[8-1] ARS—
System Setting is applied.
Value Range Links
PC Programming Manual
References
10.2 PBX Configuration—[2-2]
System—Operator & BGM
Feature Manual
References
2.13.4 Music on Hold
5.1.3 Tenant Service
PC Programming Manual
References
10.2 PBX Configuration—[2-2]
System—Operator & BGM
Feature Manual
References
5.1.3 Tenant Service
5.1.5 Operator Features
PC Programming Manual
References
16.1 PBX Configuration—[8-1]
ARS—System Setting
Feature Manual
References
2.8.1 Automatic Route
Selection (ARS)
5.1.3 Tenant Service