Panasonic KX-NS300 Pc Programming Manual page 218

9.11 PBX Configuration—[1-1] Configuration—Slot—Shelf Property—V-IPGW
9.11 PBX Configuration—[1-1] Configuration—Slot
—Shelf Property—V-IPGW
Common settings for all of the V-IPGW cards installed in the Virtual Shelf can be programmed.
Main
Name
Gatekeeper
Available
RTCP Packet
Sending Ability
RTCP Packet
Interval
RTP QoS
Available
RTP QoS-ToS
Priority
RTP QoS-ToS
Type
RTP QoS-DSCP
RTP QoS-HEX
T38 FAX QoS
Available
T38 FAX QoS-ToS
Priority
T38 FAX QoS-ToS
Type
T38 FAX QoS-
DSCP
T38 FAX QoS-
HEX
218 PC Programming Manual
Description
Specifies whether to use a gatekeeper.
Specifies whether to enable the PBX to
send RTCP packets.
Specifies the length of time until the
PBX retries to send RTCP packets
when no reply is received.
Specifies the type of value to be stored
in the ToS field of the packet.
Specifies the priority level in the ToS
field.
Specifies the ToS type in the ToS field.
Specifies the value in the ToS field by a
DSCP for DiffServ.
Specifies the value in the ToS field by a
hexadecimal number.
Specifies the type of value to be stored
in the ToS field in the IP header when
using the T.38 protocol.
Specifies the priority level in the ToS
field when using the T.38 protocol.
Specifies the ToS type in the ToS field
when using the T.38 protocol.
Specifies the value in the ToS field by a
DSCP for DiffServ when using the T.38
protocol. This setting is compulsory
when DSCP is selected in T38 FAX
QoS Available.
Specifies the value in the ToS field by a
hexadecimal number when using the T.
38 protocol. This setting is compulsory
when HEX is selected in T38 FAX QoS
Available.
Value Range
Disable, Enable
Disable, Enable
5–60 s
ToS, DSCP, HEX
0–7
Normal, Monetary
Cost, Reliability,
Throughput,
Delay
0–63
00–FF
ToS, DSCP, HEX
0–7
Normal, Monetary
Cost, Reliability,
Throughput,
Delay
0–63
00–FF
Links