Panasonic KX-NS300 Pc Programming Manual page 540

18.2 PBX Configuration—[10-2] CO & Incoming Call—DIL Table & Port Settings
Name
Distribution
Method
DDI/DID/TIE/
MSN—
Remove Digit
DDI/DID/TIE/
MSN—
Additional Dial
540 PC Programming Manual
Description
Selects the distribution
method for incoming trunk
calls. The value range of
this setting depends on the
card type and Trunk
Property assigned for each
trunk.
Specifies the number of
leading digits to be
removed from the incoming
called number for DDI/DID
distribution or for TIE line
service.
Specifies the number to be
added to the incoming
called number in the place
of the removed digits for
DDI/DID distribution or for
TIE line service.
Value Range
DIL: Distribution
depends on the
trunk through which
the calls arrive
DDI/DID: Distribution
depends on the
DDI/DID number of
the calls
MSN: Distribution
depends on the
MSN of the calls
0–15
Max. 8 digits
(consisting of 0–9, *,
and #)
Links
Feature Manual References
2.1.1.1 Incoming Trunk Call
Features—SUMMARY
2.1.1.3 Direct Inward Dialling
(DID)/Direct Dialling In (DDI)
2.1.1.4 Multiple Subscriber
Number (MSN) Ringing Service
Feature Manual References
2.1.1.3 Direct Inward Dialling
(DID)/Direct Dialling In (DDI)
2.1.1.4 Multiple Subscriber
Number (MSN) Ringing Service
4.3.1 TIE Line Service
Feature Manual References
2.1.1.3 Direct Inward Dialling
(DID)/Direct Dialling In (DDI)
2.1.1.4 Multiple Subscriber
Number (MSN) Ringing Service
4.3.1 TIE Line Service