Panasonic KX-NS300 Pc Programming Manual page 445

Name
Type Specifies the feature to be
assigned to the flexible button.
Parameter Specifies the trunk to be
Selection (for accessed.
Single CO)
Parameter Specifies the trunk group to be
Selection (for accessed.
Group CO)
Parameter Specifies whether a call is
Selection (for parked in an idle parking zone
Call Park) automatically or in a specific
parking zone.
12.1.4 PBX Configuration—[4-1-4] Extension—Wired Extension—Flexible Button
Description Value Range
Not Stored, Loop CO,
Single CO, Group CO,
DSS, One-touch, ICD
Group, Message Waiting,
FWD/DND (Both),
FWD/DND (External),
FWD/DND (Internal),
Group Fwd (Both), Group
Fwd (External), Group
Fwd (Internal), Account,
Conference, Terminate,
EFA, Charge, Call Park,
Call Log, Log-in/Log-out,
Hurry-up, Wrap-up,
System Alarm, Time
Service, Answer,
Release, TRS Level
Change, ISDN Service,
CLIR, COLR, ISDN Hold,
Headset, Time Service -
Automatic/Manual, Check
In, Check Out, Cleaned
Up, Two-way Record,
Two-way Transfer, LCS,
Voice Mail Transfer,
NDSS, CTI, PDN, SDN,
DN
Notice
For each KX-UT
series SIP phone that
is connected to the
PBX, at least one DN
button must be
assigned to the
extension. Without a
DN button assigned,
the extension will not
be able to make or
receive calls.
1–160
1–64
Automatic, Specific
Links
PC Programming
Manual References
12.1.4.1 PBX
Configuration—[4-1-4]
Extension—Wired
Extension—Flexible
Button—Flexible button
data copy
Feature Manual
References
2.5.5.3 Trunk Access
Feature Manual
References
2.5.5.3 Trunk Access
Feature Manual
References
2.13.2 Call Park
PC Programming Manual 445