Panasonic KX-NS300 Pc Programming Manual page 166

9.2.1 PBX Configuration—[1-1] Configuration—Slot—System Property—Main
Name
Connection for
IP-GW
Protocol
Progress Tone
Send Mode
V-IPGW–GW Settings–Option 1
Name
GW Name
IP Codec
Priority—1st,
2nd, 3rd
Packet
Sampling Time
(G.711A)
Packet
Sampling Time
(G.711Mu)
Packet
Sampling Time
(G.729A)
V-IPGW–GW Settings–Option 2
Name
GW Name Specifies the name of the destination
gateway device for programming
reference.
Voice Activity Enables the use of the Voice Activity
Detection for Detection feature for the G.711 codec.
G.711 This feature conserves bandwidth by
detecting silent periods during a call and
suppressing the packets of silence from
being sent to the network.
FAX Sending Specifies the method of transporting the
Method fax signal.
166 PC Programming Manual
Description
Enables the use of the Voice Activity Detection
feature between the V-IPGW and KX-TDE/KX-TDA
IP-GW cards.
Specifies the type of protocol for connectionless
tunnelling between gateway devices at different
locations in a QSIG network.
Specifies whether to send call progress tones to
the destination. When selecting External, call
progress tones are audible at the destination.
Description
Specifies the name of the destination gateway
device for programming reference.
Specifies the priority of the codecs to be used.
For fax communications, it is necessary to
specify G.711A or G.711Mu for 1st priority.
Specifies the time interval between
measurements (samples) of sound data during a
conversation. The smaller this number, the
higher the quality of the transmitted sound.
Specifies the time interval between
measurements (samples) of sound data during a
conversation. The smaller this number, the
higher the quality of the transmitted sound.
Specifies the time interval between
measurements (samples) of sound data during a
conversation. The smaller this number, the
higher the quality of the transmitted sound.
Description
Value Range
Disable (TDE), Enable
(TDA)
TCP, UDP
External, Internal
Value Range
Max. 20 characters
For 1st:
G.711A, G.711Mu, G.
729A
For 2nd and 3rd:
None, G.711A, G.711Mu,
G.729A
20 ms, 30 ms, 40 ms, 50
ms, 60 ms
20 ms, 30 ms, 40 ms, 50
ms, 60 ms
20 ms, 30 ms, 40 ms, 50
ms, 60 ms
Value Range
Max. 20
characters
Disable, Enable
G.711 Inband, T.38
Links
Links
Links