Panasonic KX-NS300 Pc Programming Manual page 431

Option 1
Name
Extension
Number
Extension
Name
Wireless XDP /
Shared
Extension
Ring Pattern
Table
Programmed
Mailbox No.
Transfer Recall
Destination
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings
Description
Specifies the extension number of
the extension.
Specifies the name of the
extension.
Specifies the extension number of
the PS with which Wireless XDP
Parallel Mode is established. To
enable Wireless XDP Parallel
Mode, the PS must be turned off
once and then turned on after
assigning this setting.
This setting also specifies the sub
extension for the main extension of
a one-numbered extension.
Note
When Wireless XDP, S-PSs
cannot be used with this setting.
Specifies the Ring Tone Pattern
Table to be used by the extension.
Specifies the mailbox number of the
incoming call distribution group's
mailbox for Voice Processing
Systems (VPS) with DTMF
Integration.
Specifies the transfer recall
destination when an extension user
transfers a call with the Call
Transfer without Announcement
feature and the transferred call is
not answered within a certain time
period.
Value Range
Max. 5 digits
(consisting of 0–
9)
Max. 20
characters
Feature Manual
Max. 5 digits
(consisting of 0–
References
9)
2.11.11 One-numbered
Extension
5.2.4.5 Wireless XDP
Parallel Mode
PC Programming
1–8
Manual References
10.8.1 PBX Configuration—
[2-8-1] System—Ring Tone
Patterns—Call from CO
10.8.2 PBX Configuration—
[2-8-2] System—Ring Tone
Patterns—Call from
DOORPHONE
10.8.3 PBX Configuration—
[2-8-3] System—Ring Tone
Patterns—Call from Others
Feature Manual
References
2.1.3.2 Ring Tone Pattern
Selection
Max. 16 digits
(consisting of 0–
9, *, and #)
Feature Manual
Max. 5 digits
(consisting of 0–
References
9)
2.12.1 Call Transfer
Links
PC Programming Manual 431