Panasonic KX-NS300 Pc Programming Manual page 554

19.1 PBX Configuration—[11-1] Maintenance—Main
Name
LAN—SMDR
Port Number
LAN—SMDR
Password
LAN—New Line
Code for Telnet
Maintenance
Name
Local Alarm
Display—
Extension 1,
Extension 2
Daily Test Start
Time—Set
Daily Test Start
Time—Hour
Daily Test Start
Time—Minute
554 PC Programming Manual
Description
Specifies the port number
used to output SMDR data via
the LAN.
Specifies the password used
to output the SMDR data via
the LAN.
Specifies the new line code for
a terminal emulator.
If the terminal emulator
automatically feeds lines with
a carriage return, select CR
(Carriage Return).
If not, select CR + LF (Line
Feed).
Description
Specifies the extension numbers of
PTs that will be notified by the PBX
about local alarms. When the PBX
detects a PBX error, the System
Alarm button on the PT turns on red.
When this button is pressed, the
display will show the error number,
and the button light will turn off
automatically.
Enables the daily self check of the
PBX for local alarm and error log.
Specifies the hour of the PBX daily
self check start time.
Specifies the minute of the PBX daily
self check start time.
Value Range
1–65535
Max. 10 characters
CR + LF, CR
Value
Range
Max. 5 digits
(consisting
of 0–9)
Disable,
Enable
0–23
0–59
Links
Feature Manual
References
2.22.1.1 Station Message
Detail Recording (SMDR)
Feature Manual
References
2.22.1.1 Station Message
Detail Recording (SMDR)
Feature Manual
References
2.22.1.1 Station Message
Detail Recording (SMDR)
Links
Feature Manual
References
5.6.4 Local Alarm
Information
Feature Manual
References
5.6.4 Local Alarm
Information
Feature Manual
References
5.6.4 Local Alarm
Information
Feature Manual
References
5.6.4 Local Alarm
Information