Panasonic KX-NS300 Pc Programming Manual page 293

9.31 PBX Configuration—[1-1] Configuration—Slot—Card Property—E1 type MFC-R2 Setting 2
9.31 PBX Configuration—[1-1] Configuration—Slot
—Card Property—E1 type MFC-R2 Setting 2
Name
Group-A Code
Assignment—Address
Complete
Group-A Code
Assignment—ANI
Request
Group-A Code
Assignment—ANI (N+1)
Group-A Code
Assignment—ANI (N+1)
Additional Code
Group-A Code
Assignment—Set up
Speech Path
Group-A Code
Assignment—(First)
Request
Group-A Code
Assignment—(N)
Request
Group-A Code
Assignment—(N-1)
Request
Group-A Code
Assignment—(N-2)
Request
Group-A Code
Assignment—(N-3)
Request
Group-B Code
Assignment—Idle (1)
Group-B Code
Assignment—Idle (2)
Group-B Code
Assignment—Idle (3)
Description
Specifies the address complete (completion of
dial reception) code sent to the telephone
company.
Specifies the code used to request the telephone
company to send an ANI number.
Specifies the code used to request the telephone
company to send the (N+1)th digit of an ANI
number.
Specifies the second code when two codes are
needed to request the telephone company to
send the (N+1)th digit of an ANI number.
Specifies the setup speech path code sent to the
telephone company.
Specifies the code used to request the telephone
company to send the first digit of an ANI number.
Specifies the code used to request the telephone
company to send the (N)th digit of an ANI
number.
Specifies the code used to request the telephone
company to send the (N-1)th digit of an ANI
number.
Specifies the code used to request the telephone
company to send the (N-2)th digit of an ANI
number.
Specifies the code used to request the telephone
company to send the (N-3)th digit of an ANI
number.
Specifies the code used normally to inform the
telephone company that the status of the called
destination is idle.
Specifies the code used in special
circumstances, such as an international call, to
inform the telephone company that the status of
the called destination is idle.
Specifies the code used to inform the telephone
company that the status of the called destination
is idle when the call is disconnected by the caller.
Value Range Links
1–15
1–15
1–15
Undefined, 1–
15
Undefined, 1–
15
Undefined, 1–
15
Undefined, 1–
15
Undefined, 1–
15
Undefined, 1–
15
Undefined, 1–
15
Undefined, 1–
15
Undefined, 1–
15
Undefined, 1–
15
PC Programming Manual 293