Panasonic KX-NS300 Pc Programming Manual page 231

Name
Connection Indicates the port status. To change
the status of the port, click the
desired cell in the column, and then
select INS or OUS for the port.
This option is only available in On-
line mode.
Headset Turns on or off the use of a headset
OFF/ON with the IP-PT.
C.Waiting When headset mode is enabled,
with Headset selects whether a call waiting tone is
heard through the telephone's
speaker phone or the ear piece of the
headset. However, this setting is
available only for telephones that
support both EHS headsets and
waiting tone path switching.
(KX-NT556, KX-NT553 only)
Ringing Tone Selects the dual-tone switching
pattern of the ring tone for incoming
calls.
IP Codec Specifies the codec used for
Priority compression and decompression of
transmitted data.
Some codecs may become
unavailable depending on the value
set here, as follows:
–
When G.722 is selected, the
priority is G.722 → G.711 → G.
729A.
–
When G.711 is selected, the
priority is G.711 → G.729A (G.722
is unavailable).
–
When G.729A is selected, both G.
711 and G.722 are unavailable.
9.14 PBX Configuration—[1-1] Configuration—Slot—Port Property—V-IPEXT
Description Value Range
INS: The port is in
service.
OUS: The port is out
of service.
Fault: The port is not
communicating with
the network.
Headset OFF,
Headset ON
PT Tone, Headset
A: 64 ms (697 Hz), 64
ms (852 Hz)
B: 32 ms (697 Hz), 32
ms (852 Hz)
C: 128 ms (697 Hz),
128 ms (852 Hz)
D: 32 ms (697 Hz), 96
ms (852 Hz)
G.711, G.729A, G.
722
Links
Feature Manual
References
5.2.1 IP Proprietary
Telephone (IP-PT)
Feature Manual
References
2.11.4 Headset
Operation
5.2.1 IP Proprietary
Telephone (IP-PT)
Feature Manual
References
2.10.4.2 Call Waiting
Tone
5.2.1 IP Proprietary
Telephone (IP-PT)
Feature Manual
References
5.2.1 IP Proprietary
Telephone (IP-PT)
Feature Manual
References
5.2.1 IP Proprietary
Telephone (IP-PT)
PC Programming Manual 231