Panasonic KX-NS300 Pc Programming Manual page 667

Name
Port
27.3.3 Network Service—[3-3] Client Feature—SNMP Agent
Using SNMP (Simple Network Management Protocol), it is possible for a PC assigned as an SNMP
manager to manage and receive PBX system status information, such as alarm information and general
system activity. The related PBX system settings can be programmed.
This option is only available at Installer level.
Name
SNMP agent
SNMP version
SNMP manager
port
MIB info—
SysContact
MIB info—
SysName
MIB info—
SysLocation
SNMP Manager #1 / SNMP Manager #2
It is possible to assign up to two PCs as SNMP managers. The settings related to SNMP manager activity
can be programmed for each SNMP manager, indicated as No.1 and No.2 on the screen.
This option is only available at Installer level.
Description
Specifies the connection port for the
remote Syslog server.
Description
Enables the PBX to use its
SNMP agent function.
Specifies the version of the
SNMP protocol to use.
Specifies the SNMP
manager port.
Specifies the name and
contact information of the
system administrator.
Specifies the administrative
name for the system.
Specifies the physical
location for the system.
27.3.3 Network Service—[3-3] Client Feature—SNMP Agent
514, 1024–65535
Value Range
Disable, Enable
SNMP V1, SNMP
V2c
161, 1024–65535
Max. 255 characters
Max. 255 characters
Max. 255 characters
Value Range
Links
Feature Manual
References
5.6.5 Simple Network
Management Protocol
(SNMP) System Monitor
Feature Manual
References
5.6.5 Simple Network
Management Protocol
(SNMP) System Monitor
Feature Manual
References
5.6.5 Simple Network
Management Protocol
(SNMP) System Monitor
Feature Manual
References
5.6.5 Simple Network
Management Protocol
(SNMP) System Monitor
Feature Manual
References
5.6.5 Simple Network
Management Protocol
(SNMP) System Monitor
Feature Manual
References
5.6.5 Simple Network
Management Protocol
(SNMP) System Monitor
PC Programming Manual
Links
667