Panasonic KX-NS300 Pc Programming Manual page 60

4.1 Status—Equipment Status
4.1 Status—Equipment Status
4.1.1 Status—Equipment Status—UPS
Information is provided about the status of the UPS device and the connection to the PBX
•
UPS Connection Status
Displays if the UPS system is connected or not connected. If a UPS system is connected, the information
below will be displayed for the UPS system.
•
Battery Voltage (V)
The voltage of the UPS battery is displayed (0-240 V).
•
Battery Charge Percentage (%)
The remaining charge of the UPS battery is displayed (percentage value).
•
Power Supply
Displays the usage status of the UPS (if the UPS is engaged in supplying power to the PBX).
•
UPS Shutdown Conditions - Battery level
From the drop-down list, select the amount of remaining battery level for when to initiate PBX shutdown
procedures.
4.1.2 Status—Equipment Status—CS Information
Displays information stored by the PBX regarding each Cell Station (CS).
This option is only available for the Installer level account in On-line mode and requires that the target
V-IPCS4 card be set to INS status.
The displayed items are as follows:
Item
Shelf
Slot
Port
CS Name
Status
Version
Revision
CSID
Path
Group Call
60 PC Programming Manual
Description
Number of the shelf
Number of the slot
Number of the port
Name of the attached CS
Service status of the attached CS: INS, OUS, or FAULT.
If the status is FAULT, subsequent data items for that port will be left blank.
Version number of the programme file stored in the CS
Revision number of the programme file stored in the CS
12-digit ID number of the CS
Number of the wireless extension currently using each path. In the case of
a group, several extensions may be using the same floating extension
number.
When an extension number is not registered, the display shows "OFF". The
number of paths that can be used varies for each CS model. For more
details, see the documentation for your CS.
Number of PSs registered to the attached CS that are members of a PS
Ring Group.