Panasonic KX-NS300 Pc Programming Manual page 61

To view CS information
1. From the Target CS I/F Shelf-Slot No. drop-down list, select the target shelf and slot.
•
To display information on a single card, select the shelf number, slot number and name of that card.
•
To display information on all matching cards, select "All".
2. From the Interval Timer drop-down list, select the number of seconds between each automatic screen
refresh.
3.
If you want to save the CS information, click Capture.
a.
Create a file for saving the data.
b.
Click Start.
c.
Click Close.
4. Click Start to begin monitoring.
Monitoring will be performed and the screen will refresh according to the interval specified.
5. Click Stop to end monitoring.
6. If you started to save the CS information in step 3, click Capture, then click Stop to record the
information to the specified file.
7. Click Close to return to the main screen.
4.1.3 Status—Equipment Status—PS Information
Displays Portable Station (PS) registration information, including the associated Cell Station (CS).
This option is only available for the Installer level account in On-line mode.
The displayed items are as follows:
Item
PS No.
Extension Number
Location Slot
Location Port
Model Name
*1
Version
*1
This information is displayed for certain PSs only. For more information, refer to the documentation for your PS.
*1
4.1.4 Status—Equipment Status—UM Port status
The UM Port status screen displays each port's status and number for the Unified Messaging system. The
screen will be updated every 30 seconds. Each port's status will be displayed in one of the following ways:
•
Online (Ready): The port is ready to be used.
•
Incoming Call: The port is handling an incoming call.
•
Outgoing Call: An outgoing service is being processed.
•
Error Occurred: An error has been detected.
•
Off Line: The port is offline.
Description
PS location number.
Only registered PSs will be displayed.
Extension number of the PS.
Slot number of the CS that the PS is registered with.
Port number of the CS that the PS is registered with.
Model name of the PS.
Software version of the PS.
4.1.3 Status—Equipment Status—PS Information
PC Programming Manual 61