Panasonic KX-NS300 Pc Programming Manual page 625

Name
Description The information typed in
this field is for reference
only.
Period 1–5, Period 1–5:
Outside Specifies the name of
date period for
reference, start and end
date, and an operation.
Outside:
Allows you to specify an
operation that is
enabled on all other
dates not included in the
set periods.
23.3.3 UM Configuration—[4-3] Service Settings—Custom
Service—Time Control
The below parameters are set for the Time Control Custom Service in the Custom Service Builder.
This service allows you to assign a different operation for up to 5 blocks of time during the day. The caller
makes no selection and no menu is announced.
Name
Description The information typed in
this field is for reference
only.
23.3.3 UM Configuration—[4-3] Service Settings—Custom Service—Time Control
Description
Max. 32 characters
Period 1–5:
Name: Max. 16 characters
From/To: Select the check box, and then
click the input field to select a date (month
and day) from the calendar. You can
specify a beginning date (From), ending
date (To), or both for each period.
Assigned Operation: Trf to Mbx, Trf to Ext,
Operator, Trf to Out, Exit, Prev Menu, CS,
VM Serv, Call Trf Serv, Subscriber Serv,
Dial by Name, Repeat Menu, Main Menu,
Trf to Fax Extn, List All Names, None (see
23.3.1 UM Configuration—[4-3] Service
Settings—Custom Service—Menu &
Transfer—Key – Assigned Operation:
0–9, *, #)
Outside:
Name: Max. 16 characters
Assigned Operation: Trf to Mbx, Trf to Ext,
Operator, Trf to Out, Exit, Prev Menu, CS,
VM Serv, Call Trf Serv, Subscriber Serv,
Dial by Name, Repeat Menu, Main Menu,
Trf to Fax Extn, List All Names, None (see
23.3.1 UM Configuration—[4-3] Service
Settings—Custom Service—Menu &
Transfer—Key – Assigned Operation:
0–9, *, #)
Description
Value Range
Value Range
Max. 32 characters
Links
Feature
Manual
References
3.2.1.15 Custom
Service
Feature
Manual
References
3.2.1.15 Custom
Service
Links
Feature
Manual
References
3.2.1.15 Custom
Service
PC Programming Manual 625