6.5
Inserting the hook thread bobbin
1
Removing the bobbin
Insert the full bobbin
Caution: danger of injury !
Switch off the main switch.
Insert the hook thread bobbin only when the sewing machine is
switched off.
–
Lift the bobbin case flap 1.
–
Remove the bobbin case body 2 with bobbin.
–
Remove empty bobbin from bobbin case body 2.
–
Place the full bobbin 3 in bobbin case body 2.
–
Pull the hook thread through slot 4 under tension spring 6 up to
borehole 5.
–
Pull the hook thread approx 5 cm out of the bobbin case body 2.
While the thread is being pulled out, the bobbin must turn in the
direction of the arrow.
–
Reinsert the bobbin case body 2 in the looper.
–
Close the bobbin case flap 1.
2
3
4
5
6
GB
21