Table of Contents
Advertisement
44
4.7
Changing the bobbin
WARNING
Risk of injury from needle tip and moving parts!
Puncture, cutting and crushing possible.
Turn off the machine before changing a bobbin.
Machines with automatic remaining thread monitor
If the hook thread needs to be replaced, the LED indicator lamps
(1) light up on the machine arm. The left light is for the left-hand
hook, and the right light is for the right-hand hook.
Fig. 26: Changing the bobbin
(1) - LED indicator lamp
Operating Instructions 868-M - 01.0 - 12/2020
Operation
①
Advertisement
Table of Contents
