How To Create New Program (Practical); Pecial Pattern - Okura Yusoki A Series Manual

3. How to create new Program (Practical)

This section explains how to create pattern not like Column type or Alternative type.
Also explains how to create program for layout which station or pallets positions are
more than one.
Please read this section for following subject.
3.1. Pattern has every layer product quantity is different or pattern is different
3.2. All product label is out (Customer is able to recognize the product)
3.3. Set stacking order by yourself or turn the some product
3.4. Multi- layout
3.5. Pyramid shape stacking pattern (PY mode)
3.6. Check the stacking pattern by QXPA-QmII
3.7. Editing some of layer
3.8. Create pattern without using Pattern registration (Manual pattern editing)
3.9. Pickup more than one product and placing each product to different position
(Multi place)
3.1.
Special Pattern
There are many applications where typical palletizing is not useful. When requiring
one or more of the following features select "Special" at the "Stacking type" list box.
1. Different pattern configurations on each layer.
2. Multi place
Select "Special" for section 3. 8. [Adding original pattern to OXPA-QmII] or section
3.9. [Multi Place].
3-1