Okura Yusoki A Series Manual page 53

3.6.4. Magnification of indication
By clicking the "Magni view" you can enlarge the planar pattern. You can change the
layer display by clicking "Top", "Up", "Down" and "Bottom." The position with the
product can be fine-tuned for Palletizing.
It displays whether fine-tuning is possible or impossible at the left of the screen.
The layer where fine-tuning is possible is the following.
In the column type, only the first layer
In the interlock type, it is the first layer and the second layer
In the special type, layer to which the same layer are not set
All layer changes if the first layer in column type is fine-tuned. Odd layer changes if
the first layer in interlock type is fine-tuned, and the even layer changes if the
second layer is fine-tuned. The layer to which a fine-tuned layer and the same layer
were set changes into a special type.
3-13