Okura Yusoki A Series Manual page 77

4.2.5. Editing Step parameter
This section explains how to edit the step parameters.
1. Select the program from editing program list box or reference program list box.
2. Double click the selected program.
3. Replace data field values will change to as selected program.
4. Change the values or select from box and click the button from replace key box on
the right side of screen. When click the replace key click the one of button which
you changed the value.
[Replace key] group
By clicking the [Step], [Position], [Speed], [Accl], [Decl], [Overlap], [PTP/CP],
[Coord] buttons, clicked content will be changed.
[Reference program]
By clicking "Ref prg" reference program list box displays. Select the reference
program form this box.
[Add]
A step is added with the smallest number not currently stored (Except step 10 and
11). After the step 9 free step number is 12. At same time the step is added, initial
setting for step parameters is stored.
[Delete]
This deletes the step at the step No. where the cursor is located.
[Reference copy]
Copy the selected reference program to selected editing program except Step and
Position data.
[OK]
By clicking "OK" save the all changes and close dialog box.
4-15