Okura Yusoki A Series Manual page 154

8.2.12. Registering Password
Password protection is available to allow only authorized personnel to access the
robot parameters via OXPA-QmII. When the password has been set, the programmer
will be required to input the password at the "Refer to password" dialog box, and
click the "Enter" button. Initially after robot registration, the password is not set.
System parameters can be changed by anyone clicking on the "Enter" button. This
should not be confused with password protection available on the robot control panel
itself.
1. Select the command from menu bar-[Utilities]-[Password registration].
2. Select the appropriate level.
3. Password registration dialog box will be displayed.
4. Highlight and enter the "Current password"
5. Highlight and enter the "New password"
6. Highlight and enter the "Password confirmation" with the same value as entered
above in "New password."
7. Click the "OK" button
Note
2. The password can be composed of 1 to 8 alphanumeric characters.
3. Passwords entered are indicated by a string of asterisks (*)
(one for each character). The actual characters are not displayed.
4. If the password is not confirmed correctly,the operation will be canceled and
have to be reentered.
1. Initially no password is set or requested by OXPA-QmII.
8-14