Okura Yusoki A Series Manual page 84

4.2.7. Editing Step position coordinate
This section explains how to edit Step position coordinate data.
1. Select the program from editing program list box or reference program list box.
2. Double click the selected program.
3. Replace data field values will change to as selected program.
4. Change the values or select from box and click the button from replace key box on
the right side of screen. When click the replace key click the one of button which
you changed the value.
[Replace key] group
By clicking the [All], [Surfc] or [hght] buttons, change the selected position in the
editing box values change to the values in the replace data field. [All] changes
surface data and height data. [Surfc] data changes only surface data. [hght]
changes only height data.
[Reference program]
By clicking "Ref prg" reference program list box displays. Select the reference
program form this box.
4-22