Okura Yusoki A Series Manual page 12

1.1.4. Tool bar
The screen which is used frequently by OXPA-QmII is designated as the icon.
With the click by the mouse, it can open the screen simply.
ICON Screen
Job selection
Position
Endeffctor
parameters
Station
conveyor
parameters
Pallet
parameter
OXPA (1/2)
Program editing
menu
Transfer program
from PC to robot
Transfer program
from robot to PC
View/delete
program in PC
Program copy
Function
New it can register job and it can select.
Position of the station conveyor and pallet
conveyor can be registered.
Parameter of the end effctor can be registered.
The information which is necessary for teaching
program compilation can be registered.
Parameter of the station can be registered.
The information which is necessary for teaching
program compilation can be registered.
The pallet can be registered.
You can make up the teaching program anew.
You can use the function which is equal to the
program editing of the robot controller.
The teaching program which was made up with
PC can be transmitted.
Error content and the like can be acquired from
the robot controller.
The teaching program in PC the list is shown.
You can also delete.
You can do the copy of the teaching program.
1-8