Diting Program - Okura Yusoki A Series Manual

4.2.
Editing program
4.2.1. Copy and delete
Copy and delete instructions for program inside of memory are as followings
Copy
1. Select [Utilities] from menu bar then select [Program copy]
2. Select the program which you want to make copy.
3. Input the program No. after copied to "Target No." field.
4. Click the "Copy" button.
5. Click "OK" when checking message box displayed.
6. Return to "Program copy" screen. If you need more copy repeat step 2 to 6.
7. Click "Exit" for closing this screen.
Note:
When the program of the same number exists at the copy destination, it is not
possible to copy it. Please specify another program number (receiving side).
whether to delete the program at the copy destination.
Delete
1. Select [Utilities] from menu bar then select [View/delete program]
2. Choose "PC."
3. Select program which you want to delete.
4. Click "delete."
5. Click "Exit" for closing this screen.
Note
Delete all program inside of PC following procedure is much quicker.
1. Select [Utilities] from menu bar then select [View/delete program]
2. Choose "PC."
3. Click "Change all."
4. Click "delete."
5. Click "Exit" for closing this screen.
For detail see section 8.2.1[List of program and delete] and section 8.2.4[Copy].
4-4