Okura Yusoki A Series Manual page 34

common to a particular application. In most situations these patterns are created
manually and then registered for selection in the future. To register the pattern
select this button after a program has been created manually. Registered patterns
are displayed the next time the "Pattern" button is selected.
If there are no user registered patterns, the message "Please select pattern", which
was registered by user" is displayed. If the "OK" button clicked, Built-in patterns are
displayed in the "Pattern selection" dialog box. If there are users registered patterns
and not desired click the "Standard" button to choose built-in pattern.
Use the pattern from pattern registered:
From pallet dimension and product dimension, OXPA-QmII search the stacking
pattern from pattern registered. Then display from oldest registered available
stacking pattern. As following figure, registered pattern displays odd layer, even
layer and by clicking right side of mouse button you can see 3D pattern. Also you
can check the "Extra top layer" or is there "Compression."
Click the "Next page" or "Prev page" button for selecting the pattern then double
click when you find your pattern. After this create teaching program and move the
last screen which is Stacking type screen. At this moment stacking order, multi-pick
and drop (for bag) information selected as same as pattern from pattern registration.
2-20