Okura Yusoki A Series Manual page 82

4.2.6. Editing Step auxiliary data
This section explains how to edit Step auxiliary data.
1. Select the program from editing program list box or reference program list box.
2. Double click the selected program.
3. Replace data field values will change to as selected program.
4. Change the values or select from box and click the button from replace key box on
the right side of screen. When click the replace key click the one of button which
you changed the value.
[Replace key] group
By clicking the [Drop], [Pick dir], [Pick prd], [Apr dir], [Turn], [Data 1], [Data 2]
buttons, clicked content will be changed.
[Reference program]
By clicking "Ref prg" reference program list box displays. Select the reference
program form this box.
[Reference copy]
Copy the selected reference program to selected editing program except layer No.
and Product quantity data.
[OK]
By clicking "OK" save the all changes and close dialog box.
[Cancel]
By clicking "Cancel" all changes are canceled.
Each step parameter in followings will be explained.
Dropping from above
4-20