Okura Yusoki A Series Manual page 146

8.2.4. Copy
Used to copy programs from one program number to another program.
1. Select the command from menu bar-[Utilities]-[Program copy].
Or click the icon
2. The "Program copy" dialog box will be displayed.
3. Click once on the program number to be copied. Highlight and change the "Dst
prog no." to the destination program number desired.
4. Click "Done" button.
5. "Would you like to copy...?" displayed. Click "YES" if copying is still desired.
6. The program will be copied as selected.
7. Click on "Exit" when completed.
.
8-6