Okura Yusoki A Series Manual page 58

3.8.
Adding original pattern to OXPA-QmII
When you can not find your pattern inside of OXPA-QmII standard pattern memory,
you can create original pattern from "Read created stacking pattern."
3.8.1. Product positioning
1. Select the "Manual" button from pattern selection screen.
2. Click the "Add" button. Product is displayed on the screen.
3. You can change the product direction by clicking the "Left" at near by center of
product.
4. Now you will see green colored circle make on the product.
5. This marked corner goes to pallet corner. Choose the corner by clicking "Left" at
corner of product.
6. Click "Left" at corner of pallet. Green colored circle marked attaches to pallet
corner.
3-18