Appendix - Okura Yusoki A Series Manual

8. Appendix

8.1.
Files inside of Hard disk
Setup OS:
It is not necessary using by recommended OS. See section 8.3.3 for recommended
OS.
Files and folders inside of installed location:
Qm2.exe: Execute program
Koho.dat: Standard pattern and original pattern data
Refprg: folders for reference program (Copied to under the new registered program).
Refprg.sp2: System parameters file of reference program
Ser_info.cf: Communication parameters file of reference program
srvboot.bin: DSP boot file of reference program
srvmain1.bin: DSP program file for reference program
For carton box palletizing:
901.pr2 - 906.pr2: Reference program for from station 1 to pallet 1 to 6
907.pr2 - 912.pr2: Reference program for from station 2 to pallet 1 to 6
913.pr2 - 918.pr2: Reference program for from station 3 to pallet 1 to 6
919.pr2 - 924.pr2: Reference program for from station 4 to pallet 1 to 6
For bag palletizing:
925.pr2 - 930.pr2: Reference program for from station 1 to pallet 1 to 6
931.pr2 - 936.pr2: Reference program for from station 2 to pallet 1 to 6
937.pr2 - 942.pr2: Reference program for from station 3 to pallet 1 to 6
943.pr2 - 948.pr2: Reference program for from station 4 to pallet 1 to 6
For de-palletizing:
949.pr2 - 954.pr2: Reference program for from station 1 to pallet 1 to 6
955.pr2 - 960.pr2: Reference program for from station 2 to pallet 1 to 6
961.pr2 - 966.pr2: Reference program for from station 3 to pallet 1 to 6
967.pr2 - 972.pr2: Reference program for from station 4 to pallet 1 to 6
8-1