Okura Yusoki A Series Manual page 145

8.2.3. Print out
To assist in the programming and training, the pattern parameters can be printed
using this function.
1. Select the command from menu bar-[Utilities]-[Print out]. Or click the icon
2. The "Print out" dialog box will be displayed.
3. Click once on the program number(s) to be printed.
4. Select by checking the item to be printed from the print options listed (such as
Program parameter, Sequence program, Step parameter, Step data).
5. Set the parameter for Line/page, Line/height, Header position, and 2
For most printers set the following parameters: Line/page to 60, Line height to 70,
Header position to 100, and 2nd line position to 1000.
6. Click the "Print" button.
7. The program will be printed on the default printer of the computer.
8. Click on "Exit" when completed.
Instead of print out the program, it is able to save to directory as file. The file name
will be "Print.txt" in default. If you want to change the file name, input the file name
in "Text file out" field.
8-5
.
nd
line pos.