Okura Yusoki A Series Manual page 149

8.2.6. Back up
Select the command from menu bar-[Utilities]-[Backup]–[Backup].
Save to Floppy disk:
Insert the formatted disk to Floppy disk drive. Then click the "Done" button. Current
robot folder will store to the floppy disk.
Restore form floppy disk:
1. Select to be copied program from "Source drive or robot" field.
2. Select the copying address from "Destination drive or robot" field.
3. Click the "Done" button.
4. Click the "Close" for exit.
You can not copy the program when to be copied program robot and copying
program robot are different. At this situation, change the copying program robot
type then copy the program from floppy disk. When restore the program by each
program, it is not necessary that to be copied program robot and copying robot are
same type.
8-9