Okura Yusoki A Series Manual page 147

8.2.5. Global remake
Select the command from menu bar [Utilities]-[Global remake].
1. Remake by one
Remake the program from basis program which is based on this program. Not
necessary to search. It is able to select the only pattern structure for succession
program. Default setting is "Remake by oneself."
2. Remake by basis program
Also it is able to basis from other program. This function is remaking the programs
which coincide from following conditions. Remake program will be as same as basis
program except Product dimension, stacking pattern.
Searching condition:
1. Station No.
2. Pallet No.
3. Product is for Carton box, bag, of de-palletizing.
Selection of succession program:
Succeed the stacking position from pallet origin. Succeeds contents are position data
such as pattern made by manual teaching, pattern which edit the position data by
edit detail, or surface united pattern. But remake does not changes product gap
(Hand information) when you change this vale, because succeeds the stacking
position.
Pattern structure:
Succeed structure pattern. When remaking program position data has been changed
by detail edit, this value will be change after the remake. Manual teaching program
8-7