Okura Yusoki A Series Manual page 155

8.2.13. Communication method
For the personal computer to communicate with the robot control panel the
communication port must be selected.
1. Select the command from menu bar-[Utilities]-[Communication method].
2. The "Communication method" dialog box will be displayed.
3. Click on the "Communication thru RS232-C (COM1)" choice.
4. Click the "OK" button.
Note
from the robot control panel if this is not set correctly.
2. The "transfer program..." Selections will be gray (not black) if the
communication port is not set correctly.
3. Initially no password is set or required by OXPA-QmII.
1. It will be impossible to download or upload information
8-15