Okura Yusoki A Series Manual page 19

Product dimension
Input product Length (L), Width (W) and Height (H) in millimeters (mm). Product
Length is measured in the direction of flow at station conveyor. Please see following
figure.
Note Length L in the case of turning
When products may or may not be turned at the station
conveyor (turning selected at pattern creation) the length is in
the direction of flow before turning. When the products are
always turned at the station (turning selected in the default
menu) the length is in the direction of flow after turning.
Width W
Length L
Handled article dimensions
Station:
The "Station" is the point where the product is picked up from. Sometimes the
station is also referred as the station conveyor. In this field choose a station
conveyor between 1 and 4. Ordinarily the station No. is 1 if there is only one station.
Height H
Station conveyor
2-5