Okura Yusoki A Series Manual page 56

The above figure is immediately after clicking the "OK" button. The changed
positional data is displayed.
Note:
The teaching program doesn't have the history of fine-tuning. Therefore, it
returns to the pattern before it fine-tunes it when making the fine-tuned
program "It is a pattern structure as for the succession data" on the batch
re-generation screen and reproducing and doing. Moreover, when the
fine-tuned teaching program is registered in the candidate and called, it
becomes a pattern before it fine-tunes it.
3.6.5. Pile on
You can see the overlap of selected layer and bottom of selected layer. You can move
one upper layer by clicking "Layer up" and move one bottom by clicking "Layer
down."
3-16