Okura Yusoki A Series Manual page 75

4.2.4. Editing Sequence program
The sequence program and the comment can be edited. Please click the column of
the instruction or the comment, and edit it directly. The editing can be canceled by
"ESC" key. The edit is ended by "Enter" key. The function of "Enter" key is described
as follows.
[Command insert]
The selected command in the "Command" list box is inserted at the location of
selected blank instruction column.
[Dev cmt Insert]
The device comment of the data memory or the relay in the instruction field is
inserted in the cursor position if it is set that the device comment file of OXPA-PLC
can be referred to. It is possible to select it only while editing the comment.
[Reference program]
Click the "Ref prg" button for select the reference program.
[Row Insert]
A new row is inserted above the selected row.
[Row Delete]
The selected row is deleted.
[Reference copy]
The row of one or more from which the reference program has been selected is
inserted above the row from which the editing program has been selected.
[All copy]
The "All copy" button copies all reference sequence program to editing program.
[Syntax check]
The "Syntax chk" button checks your sequence program is correct or not.
[OK]
The "OK" button saves your all changes.
[Cancel]
The "Cancel" button cancels all your changes.
[Find and Replace]
From list view of the editing program it finds or replace the string, or. As for the line
which becomes the object of finds and replaces please set with [ Inst Cmnt both ]
radio button.
4-13