Connecting The Device - Thermo Scientific VF-F20-A Operating Manual

5.5.2

Connecting the Device

Device Connectors
Integral Fraction Collector FT (VF-F20-A) Operating Manual
The following connectors are provided on the device:
Figure 20: Electrical connectors on the right side of the device
No. Description
1 Rating plate, indicating serial number, part number, module name, revision
number (if any), line and fuse rating, and the manufacturer's address
2 Main power switch (on/off control)
3 Fuse holder
4 Power-inlet connector
5 System Interlink port
Only allows power on/off control for the device from the Vanquish system base
and device communication so far.
6 Digital I/O ports (Dig I/O)
Allow exchange of digital signals with external instruments
Each digital I/O port provides one input and one relay output.
For debugging purposes only.
7 USB hub ("A" type connector)
Allows connection to other modules in the Vanquish system
•
5 Installation
Page 65