Connecting The Device - Thermo Scientific thermoscientific Vanquish Pumps C Operating Manual

5.5.2

Connecting the Device

Device Connectors
Pumps C, Pumps F ( VC-Pxx, VF-Pxx)
Operating Manual
The following connectors are provided on the device:
Figure 7: Electrical connectors and device connectors on the pump
No. Description
1 Rating plate, indicating the serial number, part number, module name,
revision number (if any), line and fuse rating, and the manufacturer's
address
2 Main power switch (on/off control)
3 Fuse holder
4 Power-inlet connector
5 System Interlink port
Allows power on/off control for the device from the Vanquish system base
and device communication
6 Digital I/O ports (Dig I/O)
Allow exchange of digital signals with external instruments
Each digital I/O port provides one input, one relay output, and one
bidirectional input/output. For connection and pin assignment information,
see Digital I/O (} page 288).
7 USB hub ("A" type connector)
Allows connection to other modules in the Vanquish system
5 • Installation
Page 53