Unpacking And Installation; Unpacking; Installation - Thermo Scientific SUPER-NUOVA+ Operating Manual

Unpacking and Installation

WARNING:
outlet of correct voltage and current handling
capacity.
• Do not remove or modify grounded power
plug. Use only properly grounded outlets to
avoid shock hazard. Not rated for use in
hazardous atmospheres.
• Do not use in the presence of flammable or
combustible materials; fire or explosion may
result. This device contains components
which may ignite such materials. If explosion
proof models are required, contact
Customer Service at 1-800-553-0039 for
more information.
• Do not use in highly corrosive atmospheres;
corrosive fumes and spills may damage top
and internal components, creating shock
hazard.
Note: Some misalignment of the motor bearings in this
product may have occurred during shipping. Prior to using
this product, run the stirrer at maximum speed for ten minutes
to realign the bearings.

Unpacking

Remove your SUPER-NUOVA
Inspect to ensure that the unit has not been damaged during
shipment. If the unit appears to have sustained shipping
damage contact the distributor from whom you purchased
this product or Customer Service at 800-553-0039. Check
for remote probe and thumbscrew prior to discarding
packaging.
The following items are included in the shipment:
+
• SUPER-NUOVA unit
• Cord
• Remote Probe – PT100
• Stir Bar (Stirring models only)
• Knob
• Operation's Manual
If any of these items are missing from the carton, contact
Customer Service.
20 | Unpacking and Installation
Use a properly grounded electrical
+
unit from the carton.

Installation

Set the unit on a flat stable surface at least 12" away from
combustible materials, and plug the cord set into a properly
grounded electrical outlet of correct voltage and current
handling capacity.
Figure 2. SUPER-NUOVA
Figure 3. SUPER-NUOVA
Figure 4. SUPER-NUOVA
Panel
Hot Plates, Stirrers and Stirring Hotplates
+
Hot Plate Control Panel
+
Stirrer Control Panel
+
Stirring Hot Plate Control