Engine Disassembly / Inspection - Top End; Valve Cover Removal; Camshaft Removal - Polaris RZR XP 1000 2014 Service Manual

ENGINE / COOLING SYSTEM

ENGINE DISASSEMBLY / INSPECTION - TOP END

VALVE COVER REMOVAL

The valve cover can be removed with the engine
installed in the chassis.
1. Remove the four valve cover shoulder bolts
w
isolators using a T40 driver.
w
2. Replace isolators
replace valve cover seal
3. Remove the spark plugs
with shop towels to prevent anything from falling into
the combustion chamber.
3.36
NOTE
when they are removed and
e
if oil leaks are evident.
r
. Stuff spark plug holes

CAMSHAFT REMOVAL

The camshafts can be removed with the engine
q
and 1. Rotate the engine so the PTO cylinder is at Top
Dead Center (TDC) to relieve most of the valve
spring pressure. The camshaft lobes should face out
q
and the slots on the end of the camshafts should
line up.
2. Remove the hydraulic cam chain tensioner
the cylinder. Replace the sealing washer
reassembly.
9926816 R07 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
NOTE
installed in the chassis.
© Copyright Polaris Industries Inc.
w
from
e
upon