Rrp 6-62 Staple Stage, Stack Roller & Stapler No Paper Sensor (Pl 20.12) - Xerox DOCUPRINT N4525 Service Quick Reference Manual

RRP 6-62 Staple Stage, Stack Roller & Stapler No
Paper Sensor (PL 20.12)
Fig 6-52 Staple Stage Assembly, Stack Roller Shaft and Stapler No
Paper Sensor
Removal
1.
Remove the Jogging Cover (RRP 6-14).
2.
Remove the Front and Rear Top Cover (RRP 6-16).
3.
Remove the Front Door and Stud Cover Kit (RRP 6-17).
4.
Remove the Rear Cover (RRP 6-21).
5. Remove the Motor (RRP 6-59).
6.
Remove the Motor Assembly-MP2 (RRP 6-53).
7.
Remove the Punch Dust Bottle.
8.
Remove the Stapler Assembly (RRP 6-64).
9.
Remove the Right Cover (RRP 6-81).
10.
Remove the E-ring that secure the Bearing (PL 20.12.5) and Gear (PL
20.12.6) to the front side of the Stack Roller Shaft, and remove the Bearing and
Gear.
11.
Remove the E-ring that secures the Bearing to the rear side of the Stack Roller
Shaft, and remove the Bearing.
12. Remove two Shoulder Screw (PL 20.12.14) on the front side that secure the
Staple Stage Assembly (PL 20.12.8), together with Spacer (PL 20.12.15), to
the Finisher, and remove two Spacer.
In the following steps, do not detach the Bracket (PL 20.9.5) far
Note
away because the connector (P/J 13) of the No Paper Sensor
Stapler is still connected.
6-780 DocuPrint N4525 Network Laser Printer - Service Guide
S4525-483